1. Wear personal protective equipment correctly.
What should be worn must be worn, and what should not be worn must not be worn. For example, when machining paper tube, female workers are required to wear protective caps. If not, their hair may be twisted in. At the same time, it is required not to wear gloves. If it is worn, the rotating part of the paper tube machine may twist the gloves in and injure the hands. The paper tube machine equipment shall also be inspected according to the regulations during operation. In particular, check whether the fastened objects are loose due to vibration, so as to re tighten them. Before operation, check the safety of the paper tube machinery and equipment, and run it in an empty car. After confirming that it is normal, it can be put into operation. It is strictly prohibited to operate the equipment with faults, and it is strictly prohibited to make use of the equipment to prevent accidents. During the operation of paper tube mechanical equipment, it is strictly prohibited to adjust it by hand; it is also prohibited to measure parts by hand, or lubricate and clean sundries. If it is necessary to do so, the mechanical equipment shall be shut down first, and the cutters, jigs and processed parts used for the paper tube mechanical equipment shall be firmly clamped without loosening. The mechanical safety device must be used correctly according to the regulations. It must not be removed or not used. When the paper tube mechanical equipment is running, the operator shall not leave the work position to prevent the problem from being handled by nobody. After the work is finished, the switch shall be closed, the cutter and workpiece shall be withdrawn from the work position, the work site shall be cleaned, the parts, jigs, etc. shall be placed in order, and the paper tube mechanical equipment shall be cleaned.
2 operation rules of paper tube machine
 Gear must be fully engaged when changing gear. If the machine tool is found to be abnormal, stop the machine immediately for inspection. When using the grinding wheel pipe cutter, check whether the grinding wheel is damaged, cracked, damped and whether the power cord is reliable in advance. When changing tools, measuring workpieces, lubricating and cl